Moxa Technologies DE-334 - Manual (Page 55)

Installation and Configuration
NPort Server Lite User’s Manual 4-29
Adding a Host IP Address to a Specific Port
1. Click on the Port you would like to add the host to.
2. Click on Add IP.
3. To add access for only one computer, select a single computer, and then enter the
host’s IP address in the appropriate text box.
To add access for a group of computers, select a group of computer, and then enter
the IP address and netmask. (E.g., for network class C computers, you might enter
192.168.1.0 for IP address, and then 255.255.255.0 for netmask.)
4. Click OK to finish.