Moxa Technologies DE-334 User Manual
Page 37
Advertising
Installation and Configuration
NPort Server Lite User’s Manual 4-11
5. Click OK to finish.
Unmap Port
If you do not need to use a port any more, you may use the toolbar Unmap Port function to
remove it from your Windows NT/95/98 operating system.
1. Click on the server you would like to modify. The ports on that server will be listed on
the right side of the window.
2. Click on the port you want to delete to
highlight it.
3. Click on the Unmap Port icon to remove
the selected port. In the example shown
here, we deleted Port 3, as indicated by
the “ellipses” (…) under COM, and a
missing “plug” icon under Port.
.
Note: The screen shown above is what you should see after unmapping Port 3 of the server.
Advertising