Moxa Technologies DE-334 - Manual (Page 57)

Installation and Configuration
NPort Server Lite User’s Manual 4-31
Adding Routes to NPort Server Lite
To enable access from an Internet/Intranet host, first make sure your NPort Server Lite can
be connected through the Internet.
You may add routes into NPort Server Lite if your Windows NT/95/98 host is at a remote
site. This section lists the steps you should follow to add new routes, including examples
you can refer to.
Adding Routes Through Server Properties
1. Select Start
à Programs à NPort à NPort Server Lite Manager.
2. Select the server you want to add routes to.
3. Click on the toolbar Server Properties icon, and then the Advanced tab.