Moxa Technologies DE-334 - Manual (Page 76)

4-50
NPort Server Lite User’s Manual
Refresh Monitor
This function is provided to allow you to manually update port information.
1. Click on the port you would like to refresh to highlight it.
2. Click on Monitor and choose Refresh Monitor, or simply click on the toolbar
Refresh Monitor icon to update port information manually.
Reset Port
This function is provided to allow you to reset the port whenever the NT/95/98 server was
not shut down properly, or the network was disconnected. Normally, NPort Server Lite will
be launched automatically five minutes after the NT/95/98 server is reconnected. This
function allows you to restart the port manually if necessary. While resetting the port, the
port transmission process will be halted, and all temporary data will be lost.
.
Note: Do not use Port Reset while transmitting IMPORTANT data.
1. Click on the port that you are going to reset to highlight it.
2. Click on Monitor and choose Reset Port, or simply click on the toolbar Reset Port
icon to reset the port.
.
Note: A Reset Port dialog box will open requesting a password before resetting the port if
you have previously set up the security password using NPort Server Lite Manager. If
you didn’t setup the security password, the following dialog box won’t be displayed.