Moxa Technologies DE-334 - Manual (Page 13)

Getting Started
NPort Server Lite User’s Manual 2-3
Connecting the Hardware
In the previous section we illustrated the general operation mode of NPort Server Lite. We
begin this section by describing how to find a proper location for your server, and then
explain how to connect to the network, hook up the power cable, and connect to the
server’s serial port.
Choosing a Location
There are three placement options available. NPort Server Lite can be:
•
placed on a desktop,
•
fixed to a wall or inside a cabinet, or
•
fixed to a 35-mm DIN Rail.
Desktop
One option is to place NPort Server Lite on a clean, flat, well-ventilated desktop. There are
four rubber pads attached to the bottom of the server, and we recommend leaving sufficient
room between NPort Server Lite and neighboring equipment to create enough clearance for
air to circulate.
You should also remember not to put anything on top of NPort Server Lite, since this could
damage the internal components and obscure the server’s LCD panel.
Wall or Cabinet
The two metal brackets included with NPort Server Lite can be used to attach the server to
a wall, or the inside of a cabinet. Using three screws per bracket, first attach the brackets to
the bottom of the server (Fig. 2-2a). Next use two screws per bracket to attach the server to
a wall or cabinet (Fig. 2-2b).
Figure 2-2a. NPort Server Lite—Wall Mounting Brackets (bottom view)