Moxa Technologies DE-334 - Manual (Page 54)

4-28
NPort Server Lite User’s Manual
Removing Ports from a Granted Host
1. Double click on the host’s IP address.
2. Click on the Port that you would like to remove from the list.
3. Click on Remove , and then click OK to exit.
4. Select Save Configuration if you need to activate the settings immediately.
Removing a Host
If you do not allow a particular host to use any of the ports, simply remove the host from
the list. Note that removing all hosts will grant server access to all computers.
1. Double click on the host’s IP address.
2. Click on the Remove button, and then click OK to exit.
3. Select Save Configuration if you need to activate the settings immediately.
Configuring Through View by Port
By choosing the option View access control list by Port, it is easy to see the access
permission granted for each port. This viewing option is particularly useful for adding hosts
to specific ports.