Oven cooking, Control panel, Using the touchpads – Maytag MGR5775QDW User Manual

Page 9: Clock

Advertising
background image

8

Oven Cooking

Control Panel

The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.
Control panel shown includes model specific features. (Styling may vary depending on model.)

Using the Touchpads

• Press the desired pad.

• Press More+ or Less- to enter time or temperature.

• A beep will sound when any pad is touched.

• A double beep will sound if a programming error occurs.

A

Broil

Use for broiling and top browning.

B

Bake

Use for baking and roasting.

C

More+/Less-

Enters or changes time, oven
temperature. Sets HI or LO broil.

D

Timer

Sets Timer.

E

Cook & Hold

Bakes for a preset time, then holds food
warm for 1 hour.

F

Clean

Use to set self-clean cycle.

G

Favorite

Use to set and save a specific Cook &
Hold procedure.

H

Clock

Use to set time-of-day clock.

I

Keep Warm

Use to keep cooked food warm in oven.

J

CANCEL

Cancels all operations except Timer
and Clock.

A B

C D

E F G H I J

Note: Four seconds after pressing the More+ or Less-
pad, the time or temperature will automatically be entered.
If more than 30 seconds elapse between touching a
function pad and the More+ or Less- pad, the function
will be canceled and the display will return to the previous
display.

Clock

The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.

To change the clock to 24-hour format:

1. Press and hold the CANCEL and

Favorite pads for three seconds.

2. Press the More+ or Less - pad to

select 12 or 24 hour.

3. Set the time of day following the

directions below.

To set the Clock:

1. Press the Clock pad.

• The colon flashes in the display.

2. Press More+ or Less- to set the time of day.

• Colon continues flashing.

3. Press the Clock pad again or wait four

seconds. The colon stops flashing.

When electrical power is supplied or after a
power interruption, the last clock time before
power was interrupted will flash.

To recall the time of day when another time function is
showing, press the Clock pad.

Clock time cannot be changed when the oven has been
programmed for Delay Cook or Delay Clean or Cook & Hold.

cont.

Advertising