Minolta FAX2900 - Manual (Page 106)

5.3 Basic Faxing 5
5-13
Fa
xi
n
g
Ch
apte
r 5
5.3 Basic Faxing
To fax using the Auto Document Feeder
1
Press the [Fax] key.
The machine enters Fax mode,
and the fax screen appears.
2 Load the document to be faxed
into the Auto Document Feeder.
❍ Adjust the Document Guide
Plates to fit the size of the
document.
❍ Load the document face up.
3 If necessary, change the “Resolution” setting (p. 5-12).
4 Using the 10-Key Pad, enter the
fax number of the recipient.
❍ The fax number of a previously
programmed recipient can also
be specified. Refer to “Dialing”
on page 5-2.
5 Press the [Start] key to begin scanning and sending the fax.
❍ To stop the transmission, press the [Stop] key.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed (p. 7-74).
Fax