Minolta FAX2900 - Manual (Page 272)

9.2 Getting Ready 9
9-25
Int
er
net F
a
x &
Ne
twor
k
Sc
an
Ch
apte
r 9
6 Set the power switch for the copier to “
2”, then “1” to restart the copier.
Specifying the E-mail Settings (“E-MAIL SETTING 1” Menu)
The settings for the E-MAIL SETTING 1 functions are specified from the
“E-MAIL SETTING 1” menu in Utility mode.
This section describes how to specify settings for the following functions.
● SENDER NAME
● E-MAIL ADDRESS
● SMTP SERVER
● SMTP PORT NO.
● SMTP TIMEOUT
● TEXT INSERT
● DEFAULT SUBJECT
✎
Tip
If you wish to cancel a change to a setting before applying it, press the
[No] key. Press the [Yes] key after the message “STOP SETTING?”
appears.
Registering the Sender’s Name
1 Press the [Utility] key. The Utility
mode menu screen appears.
2
Press the or key until “E-
MAIL SETTING 1” appears.
3 Press the [1] key on the 10-key pad
to select “SENDER NAME”.
4 Enter the sender name.
❍ For information on entering text,
refer to “Entering Text” on
page 3-18.
❍ Up to 20 characters can be entered for the sender name.
[ ]