Minolta FAX2900 - Manual (Page 203)

7 7.8 Setting Up the Reception
7-66
Usi
ng the Util
it
y
M
ode
Ch
apte
r 7
Specifying the Setting for “FORWARD”
1
Select the “RX OPERATION”.
❍ Refer to “Selecting the “RX OPERATION” menu .
2 Press the [6] key from the 10-Key
Pad to select “FORWARD”.
3 Using the [ ] and [ ] keys,
select “ON”, “ON(PRINT)” or
“OFF”, and then press the [Yes]
key.
❍ If “ON” or “ON(PRINT)” was
selected, a screen appears, allowing you to specify the forwarding location.
(Continue with step 4.)
❍ If “OFF” was selected, the “RX OPERATION” menu appears again.
4 Using the one-touch dial keys or
the speed dial numbers, or by
entering the fax number using the
10-Key Pad, specify a fax number,
and then press the [Yes] key.
The “RX OPERATION” menu appears again.
✎
Tip
An e-mail address can be specified as a forwarding location only with FAX3900.
For details, refer to this Chapter 9 “Internet Fax & Network Scan
[1]