Minolta FAX2900 - Manual (Page 201)

7 7.8 Setting Up the Reception
7-64
Usi
ng the Util
it
y
M
ode
Ch
apte
r 7
Specifying the Setting for “NO.of RINGS”
1
Select the “RX OPERATION”.
❍ Refer to “Selecting the “RX OPERATION” menu .
2 Press the [2] key from the 10-Key
Pad to select “NO.of RINGS”.
3 Using the 10-Key Pad, enter the
desired number of rings, and then
press the [Yes] key.
❍ The number of rings can be set
between 1 and 16.
The “RX OPERATION” menu appears again.
Specifying the Setting for “REDUCTION RX”
1 Select the “RX OPERATION”.
❍ Refer to “Selecting the “RX OPERATION” menu .
2 Press the [3] key from the 10-Key
Pad to select “REDUCTION RX”.
3 Using the [ ] and [ ] keys,
select “ON” (print the document
reduced), “OFF” (split the printout)
or “CUT” (discard any excess),
and then press the [Yes] key.
The “RX OPERATION” menu appears again.