Minolta FAX2900 - Manual (Page 168)

7.6 Setting Up the Fax Registration 7
7-31
Usi
ng the Util
it
y
M
ode
Ch
apte
r 7
Specifying the Setting for “SPEED DIAL”
If speed dial numbers are programmed with fax numbers, the recipient can be
specified easily and accurately without the need to manually enter the number
using the 10-Key Pad.
The following is the maximum of numbers that can be programmed.
FAX3900: 200
FAX2900: 100
To program a speed dial number
1 Select the “FAX REGISTRATION”.
❍ Refer to “Setting Up the Fax Registration .
2 Press the [2] key from the 10-Key
Pad to select “SPEED DIAL”.
3 Using the 10-Key Pad, enter the 3-
digit speed dial number (ex. 011)
that you wish to program.
4 Enter the name of the
programmed number.
❍ For details on entering text,
refer to “Entering Text .
❍ Text up to 20 characters long
can be entered for the name.
5 Press the [Yes] key.
6 Using the 10-Key Pad, enter the
fax number of the recipient.
❍ The fax number can contain a
maximum of 30 digits.
For details on the characters
that can be entered. Refer to “To fax by entering the fax number directly
using the 10-Key Pad .
❍ To enter a SUB, continue with step 7.
❍ If SUB will not be entered, press the [Yes] key after entering the fax number,