Minolta FAX2900 - Manual (Page 316)

9.4 Using Scan to Server (FTP) Operations 9
9-69
Int
er
net F
a
x &
Ne
twor
k
Sc
an
Ch
apte
r 9
5 Press the and keys to select
the color mode (“COLOR” or “B/W”),
and then press the [Yes] key.
6 Press the and keys to select
the resolution (150
× 150 dpi,
300
× 300 dpi, or 600× 600 dpi), and
then press the [Yes] key.
❍ The 600
× 600 dpi resolution cannot be selected if “COLOR” was
selected as the scan mode in step 5.
❍ To specify detailed settings for the scan mode, press the key.
❍ For information on specifying detailed settings, refer to “Changing
the Scan Mode Settings” on page 9-59.
7 Press the [Start] key.
Scanning starts, then the scan data
is sent to the recipients.
❍ To change the size of the scanned image, press the key.
❍ For information on changing the size, refer to “Changing the
Scanned Image Size” on page 9-60.
✎
Tip
Up to 10 specified recipients can be notified by e-mail of the FTP
server address where a file was uploaded. When using
PageScope Light to register the speed dial information, select
“Enable Notification”. (Refer to “Adding a New Speed Dial (FTP
Server) Setting” on page 9-53.)