Multi-Tech Systems MT3334HD8 - Manual (Page 20)

MT3334HD8 User Guide
14 CommPlete Communications Server
Table 1. AT Commands by Function
Topic Command Description Page
Dialing Action D Dial 16
A: Continuous redial
H On-hook/off-hook
Dial Modifiers P Pulse dialing 16
T Tone dialing
W Wait for new dial tone
R Reverse originate/answer mode
, Dialing pause
: Continuous redial
; Return to command mode after dialing
! Flash on-hook
@ Quiet answer
$ Call card tone detect
Phone Number D...N Store a phone number 19
Memory N Dial a stored number
N...N Number linking
L List stored telephone numbers
Configuration &W Store configuration 20
Storage & Recall &F Load default configuration
Z Reset modem
Modem Responses E Echo command mode characters 21
(Result Codes) Q Result codes: enable/disable
&Q Result codes: Multi-Tech or standard
V Result codes: verbose/terse
X Result codes and call progress
&A Answerback
Online Connection #A Auto speed detection 24
B Answer tone
%DC Command mode control
&CD Cleardown at disconnect
>DT DTMF detection
#F Fallback modes when online
&G Guard tones
*H Busy-Out After Disconnect
&P Pulse dial ratios
&RD Square wave ring detect
$T Calling tones
#T Trellis-coded modulation
Y Long space disconnect
V.34 Controls %F Echo canceler frequency offset comp. 28
&RA Asymmetric bit rate
RS-232 Interface &C Carrier Detect control 29
Controls &D Data Terminal Ready control
&R Clear to Send control
&S Data Set Ready control
&RF CTS/RTS interaction control
&SF DSR/CD interaction control