Multi-Tech Systems MT3334HD8 - Manual (Page 86)

MT3334HD8 User Guide
80 CommPlete Communications Server
Command Values Description
$MBn n = speed Modem Baud Rate
$MB75
Select ITU-T V.23 mode.
$MB300 Select 300 bps on line.
$MB1200 Select 1200 bps on line.
$MB2400 Select 2400 bps on line.
$MB4800 Select 4800 bps on line.
$MB7200 Select 7200 bps on line.
$MB9600 Select 9600 bps on line.
$MB12000 Select 12,000 bps on line.
$MB14400 Select 14,400 bps on line.
$MB16800 Select 16,800 bps on line.
$MB19200 Select 19,200 bps on line.
$MB28800 Select 28,800 bps on line.
*** $MB33600 Select 33,600 bps on line.
Nd d = 0 or 1 Dial a Stored Number
Dial stored telephone number d.
NdNe... d = 0 or 1
e = 1 or 0 Number Linking
Dial stored number d; if that is busy, dial stored
number e. The command may be extended
NdNeNdNe... to cycle between the two numbers.
O n/a Go Back On Line
Exit command mode and go into online mode after
using the escape code to do the reverse.
P In dialing
command *** Pulse-Dial
Modem pulse-dials numbers that follow P.
&Pn n = 0 or 1 Set Pulse Dial Ratios
*** &P0 60:40 pulse ratio.
&P1 67:33 pulse ratio.
Note: The ZDXK is locked to &P1, a 67:33 ratio.
Qn n = 0–2 Result Codes Enable/Disable
*** Q0 Result codes sent.
Q1 Result codes suppressed (quiet).
Q2 No Response answer mode.
&Qn n = 0 or 1 Result Codes (Multi-Tech or Standard AT)
*** &Q0 Multi-Tech responses with modifiers.
&Q1 Standard AT responses with no modifiers.
Rn n = 0 or 1 Reverse Originate/Answer Mode
*** R0 Modem will not reverse modes.
R1 Modem will reverse modes when R is added to
dial string.