Multi-Tech Systems MT3334HD8 - Manual (Page 90)

MT3334HD8 User Guide
84 CommPlete Communications Server
Command Values Description
; At end of dial
command Return to Command Mode After Dialing
Semi-colon; causes immediate return to command
mode after dialing.
! In dial
command Flash On-Hook
Exclamation; causes modem to flash on-hook.
@ In dial
command Quiet Answer
Causes modem to wait for a ringback, then 5 seconds
of silence before processing next part of command.
$ In dial
command Call Card Tone Detect
Causes modem to wait for a call card tone before
processing next part of command.
+++AT<CR> Escape Sequence
Puts modem in command mode while still remaining
on line. Type +++ followed by the letters A and T, up
to ten command characters (or as defined by S34),
and a RETURN.
<BREAK>AT<CR> Break Escape Sequence
Alternate escape method. Puts modem in command
mode while still remaining on line. Enter break signal
followed by the letters A and T, up to sixty command
characters, and a RETURN.
%%%AT<CR> Remote Configuration Escape Sequence
Cause remote modem to display remote configuration
menu. Type %%% (or as defined in register S13)
followed by the letters A and T, and a RETURN.
* Factory default on International model
** Not available on U.K. model
*** Factory default on North American model