Cleaning the condenser (heat exchanger) unit 26, Removing the condenser unit 26, Cleaning and care – Miele NOVOTRONIC T 7644 C User Manual

Page 26: Cleaning the condenser (heat exchanger) unit

Advertising
background image

Cleaning the condenser (heat
exchanger) unit

Detergent residue, hair and fine lint
from the laundry can get through the
lint screen and plug the condenser.
Dust from the room taken in with the
cooling air can also cause blockages.

Check the condenser at least twice
a year and also if the Filter/Vent
indicator light comes on. For
frequent use, no later than
approximately every 100 drying
cycles. Clean it when necessary.

Removing the condenser unit

^ Open the outer panel.
^ Remove the panel by pulling it

diagonally upwards and put it aside.

^ Turn the locking lever on the inner

cover downwards.

^ Tilt the internal cover forwards.
^ Remove it by pulling it diagonally

upwards.

^ Rotate the locking lever on the

condenser upward (the locking lever
hook disengages from the groove in
the base).

Cleaning and care

26

Advertising