Miele NOVOTRONIC T 7644 C - Manual (Page 38)

Leveling the dryer
To ensure trouble-free operation, the
dryer must be level.
^ Compensate for floor irregularities by
turning the threaded feet in or out.
,
Do not block the gap between
the bottom of the tumble dryer and
the floor with plinth facings, deep
pile carpet etc. This would hinder a
sufficient flow of air to the dryer.
,
The air inlet/outlet vents on the
front and back must NEVER be
covered. Otherwise, sufficient
condenser cooling cannot be
ensured.
Installation and connection
38