Miele NOVOTRONIC T 7644 C - Manual (Page 42)

1 Adapter
2 Sink coupling nut
3 Hose clip
4 End of hose
5 Non-return valve
6 Dryer drain hose
^ Fit the adapter to the sink drain outlet
1 with the sink coupling nut 2.
Usually the sink coupling nut has a
flat washer, which you must remove.
^ Fit the end of the hose 4 to the
adapter 1.
^ Using a screwdriver, tighten the hose
clip 3 directly behind the sink
coupling nut.
,
Install the non-return valve 5 so
that the arrow points in the direction
of flow (towards the sink). Otherwise,
pumping out will be impossible.
^ Insert the non-return valve 5 into the
dryer drain hose 6 (make sure it is
connected in the right direction,
check the arrow on the non-return
valve!).
^ Attach the non-return valve using the
hose clips.
Installation and connection
42