Miele NOVOTRONIC T 7644 C - Manual (Page 41)

Hooking up the drain hose (in sink or
floor drain)
^ See front view illustration.
,
If you decide to hook the hose
up to a sink, secure it against being
detached, by clamping it, for
example. Otherwise overflowing
water can cause damage.
^ Use the bow-shaped holder to
prevent the drain hose from
becoming kinked.
Special installation conditions
requiring a non-return valve
,
Under special connection
conditions, a non-return valve (kit
available) for external water
disposal (optional accessory) must
be used. This will prevent the
back-flow of water into the dryer and
possible damage.
Such special conditions include:
– Connection to a sink drain outlet (see
following section).
– Various kinds of connection, to which
an automatic washer or dishwasher
already in use are also connected.
Example: Connection to a sink drain
outlet
The drain hose with non-return valve
can be connected directly to a special
sink drain outlet.
^ Remove the accessories from the top
of the rear side of the dryer:
Adapter 1 and the hose clip 3 behind
it.
Installation and connection
41