Trouble shooting – Miele NOVOTRONIC T 7644 C User Manual
Page 32
Problem
Cause
Solution
Water runs from the
dryer after the
condenser has been
cleaned:
– The condenser inner
cover and/or the
condenser have not
been properly inserted
and latched.
– Lint is sticking in the
condenser housing
recess.
– Verify that the internal
cover and the
condenser are
correctly and solidly
seated.
– Check their rubber
seals as well.
– Using a cloth, remove
all visible lint from the
heat exchanger recess.
Synthetic laundry items
are statically charged
after drying.
Synthetics have a
tendency to static
discharges.
Using a fabric softener in
the last rinse cycle can
reduce static charge
when drying.
There has been a lint
buildup.
Drying releases fabric lint
formed primarily from
rubbing during wear but
also, in part, from
washing. The stress on
fabrics in the dryer is
minimal in relation to their
strength.
Lint released is captured
in the lint screen and can
be easily removed (see
"Care and Cleaning").
Trouble shooting
32