Miele NOVOTRONIC T 7644 C - Manual (Page 37)

Rear view
a Handgrips under the cover overhang
for moving the appliance (arrows)
b Air inlet vent for cooling condenser
unit
c Power cord
d Condensed water drainage hose
e Accessories for connection to a sink
drain outlet
Installation site
This dryer can be accommodated
under a worktop if there is sufficient
height.
,
Do not install the dryer in a
location where its door could conflict
with room doors.
,
The appliance top is not
removable.
Carrying the dryer to the installation
site
The rear cover overhang provides
handgrips for transport. To carry the
dryer from the packing base to the
installation site, use the appliance front
feet and the rear cover overhang.
Washer-dryer stack
The dryer can be combined with a
Miele automatic washer in a
washer-dryer stack. For this, a "WTV
412" stacking unit* is required.
* Miele accessory available on order
,
Installation of the stacking unit
may be performed only by an
authorized Miele technician.
Installation and connection
37