Warning, Important safety information – Monessen Hearth Direct Vent Gas Fireplace KHLDV SERIES User Manual

Page 4

Advertising
background image

4

73D0024

IMPORTANT SAFETY INFORMATION

Continued from page 3

12. Do not use this fireplace to cook food or burn paper or

other objects.

13. Never place anything on top of fireplace.
14. Do not use any solid fuels (wood, coal, paper, cardboard,

etc.) in this fireplace. Use only the gas type indicated on
rating plate.

15. This appliance, when installed, must be electrically

grounded in accordance with local codes or in the
absence of local codes, with the National Electrical Code,
ANSI/NFPA 70
, or the Canadian Electrical Code, CSA
C22.1.

16. Do not obstruct the flow of combustion and ventilation

air in any way. Provide adequate clearances around
air openings into the combustion chamber along with
adequate accessibility clearance for servicing and proper
operation.

17. When the appliance is installed directly on carpeting, tile

or other combustible material other than wood flooring,
you must set appliance on a metal or wood panel or hearth
pad extending the full width and depth of the appliance.

18. Do not use fireplace if any part has been exposed to or

has been under water. Immediately call a qualified service
technician to inspect the appliance and replace any part
of the control system and any gas control which as been
submerged in water.

19. Do not operate fireplace if any log is broken.
20. Do not use a blower insert, heat exchanger insert, or

any other accessory not approved for use with this fire-
place.

21. Do not operate the fireplace with glass door removed,

cracked, or broken.

IMPORTANT:

PLEASE READ THE FOLLOWING CAREFULLY

It is normal for fi replaces fabricated of steel to
give off some expansion and/or contraction noises
during the start up or cool down cycle. Similar
noises are found with your furnace heat exchanger
or car engine.

IMPORTANT:

PLEASE READ THE FOLLOWING CAREFULLY

It is not unusual for gas fi replaces to give off some
odor the fi rst time it is burned. This is due to the
manufacturing process.

Please ensure that your room is well ventilated

during burn off — open all windows.

It is recommended that you burn your fi replace for
at least ten (10) hours the fi rst time you use it. Place
the fan switch in the “OFF” position during this time.

Never connect unit to private
(non-utility) gas wells. This
gas is commonly known as
wellhead gas.

W

ARNING

www.nfi certifi ed.org

We suggest that our gas hearth
products be installed and
serviced by professionals who
are certifi ed in the U.S. by the
National Fireplace Institute

®

(NFI) as Gas Specialists.

Advertising