Miller Electric Invision 456MP - Manual (Page 24)

OM-193 267 Page 20
4-2. Meter Functions
.
The meters display the actual weld output values for approximately three seconds after the arc is broken.
Mode Meter Reading At Idle Meter Reading While Welding
MIG
Preset Volts Blank
V A
24.5
Actual Volts Actual Amps
V A
24.5 250
Pulsed
MIG
Blank Pulse Display
V Trim
50
Actual Volts Actual Amps
V A
24.5 250
Stick−
Contactor Remote
Blank Preset Amps
V A
85
Actual Volts Actual Amps
V A
24.5 85
Stick−
Contactor ON
Actual Volts (OCV) Preset Amps
V A
80.0 85
Actual Volts Actual Amps
V A
24.5 85
Manual
Pulse
Pulses Per Second
V A
PPS 200
Actual Volts Actual Amps
V A
24.5 85
.
The Stick mode provides the Adaptive Hot Start ™ feature, which automatically increases the output amperage at the start of a weld should the
start require it. This eliminates electrode sticking at arc start.