Easycoder pl4 printer user’s guide 11 – Intermec EASYCODER PL4 User Manual
Page 11
EasyCoder PL4 Printer User’s Guide
11
Fault
Fast C
harg
e
Fault
Fast C
harg
e
Fault
Fast C
harg
e
Read
y
Pow
er
Full C
harg
e
Read
y
Full C
harg
e
Read
y
Full C
harg
e
Full C
harg
e
Fault
Fast C
harg
e
Read
y
Power
supply
Power
indicator
Charger
bay
Green
indicator
Amber
indicator
PL4U009.eps
2
Plug a battery into any one of the four charger bays, noting
the orientation of the battery.
3
Slide the battery into the charging bay until it stops and then
rock the battery back until it snaps into place. The amber
indicator directly under the battery being charged will turn
on if the battery is properly installed.
The indicators under the battery will allow you to monitor the
charging process per the next table.
Amber
Green
Battery Status
On Off
Charging
On
Flashing
80% charged (OK to use)
Off On
Completely
charged
Flashing
Off
Fault