Intermec EASYCODER PL4 - Manual (Page 9)

EasyCoder PL4 Printer User’s Guide 9
Do not attempt to charge batteries with the charger while
printing. Attempting to print while charging can result in
improperly charged batteries.
Attention: Ne pas essayer de charger des batteries à l’aide du
chargeur pendant l’impression. Toute tentative d’impression
pendant le processus de charge risque de produire des
batteries mal chargées.
To use the single battery charger
1 (Optional) Install the battery in the printer. For help, see the
previous section.
2 Insert the AC contact adapter into the single battery charger.
3 Plug the single battery charger into an AC wall receptacle.
4 Insert the charge cable into the charger jack.
Single
battery
charger
AC
contact
adapter
Charger
jack
PL4U008.eps
Charger
LED