Intermec EASYCODER PL4 - Manual (Page 44)

44 EasyCoder PL4 Printer User’s Guide
where “xxx.xxx.xxx.xxx” is replaced with valid IP address
values for your network. If you are unsure what values to
enter, please contact your network administrator for
assistance.
8 Test the ad hoc connection. For help, see the next procedure.
To test the ad hoc connection
1 Print a configuration label. For help, see “Verifying the
Printer Is Working” earlier in this guide.
2 Ping the IP address of the printer and verify
acknowledgement (from a DOS prompt on Windows
platforms).
3 Print a test label via Intermec PLUS. Test using TCP sockets
(port 6101) and LPD.
Setting Up the Software
The PL4 uses the CPL programming language that was designed
for portable printing applications. CPL is fully described in the
EasyCoder PL-Series Printer Programmer’s Reference Manual,
available online from the Intermec web site at
www.intermec.com
You can also use Intermec PLUS, the Windows ™ -based label
creation program that uses a graphical interface to create and
edit labels in the CPL language. PLUS is available either online
at the Intermec web site or on the CD that ships with the
printer.
To install Intermec PLUS
1 Insert the CD that came with your printer into the CD drive
of your computer. The CD welcome screen appears.
2 Click Software. The Software screen appears.
3 To start the installation wizard, click the icon or text for the
Intermec PLUS application.
4 Follow the instructions that appear on your screen.
5 Open Intermec PLUS. For help, see the following procedure.