IBM INFO PRINT 3000 - Manual (Page 118)

Cleaning the Oiler Belt
Notes to the Operator On Cleaning the Oiler Belt
v For reliable printer performance, clean the oiler belt at least once each
week.
v You need the following items to clean the oiler belt:
– Lightweight cardboard (scraps)
– Cloth or paper towels.
v It is not necessary to switch the printer power off during this procedure,
but the printer should be disabled.
CAUTION:
<70> The oiler belt, oiler wick roll, and their environments are
areas. Be very careful when working in
these areas.
high-temperature
CAUT0100
1.
SELECT the Stop pushbutton on the Display Touch Screen window for the
affected printer.
2.
Open the stacker end cover.
86
InfoPrint 3000 Operator’s Guide