IBM INFO PRINT 3000 - Manual (Page 146)

AT THE DISPLAY TOUCH SCREEN:
32.
If you have changed to a different-size form, SELECT the Assign Form to
Load... procedure from the Options pull-down menu.
33.
If the form name in the Select a Form Name box is the form you are loading,
SELECT the Cancel pushbutton. If the form name is not in the Select a Form
Name box, SELECT the Search pushbutton.
A keyboard appears so you can enter the name of the form you are loading.
Note: The search function is case sensitive. That is, you must enter the form
name exactly, including any capital letters, as it was originally defined.
34.
When you have found the correct form name, SELECT the OK pushbutton.
35.
If you have changed to preprinted forms or labels, check the forms alignment
and the location of the print on the page. See “Adjusting the Print Position”
on page 68.
36. If necessary, enable the channels.
37.
SELECT the Ready pushbutton to continue.
114
InfoPrint 3000 Operator’s Guide