IBM INFO PRINT 3000 - Manual (Page 59)

Stacker Area
Printed and fused fan-fold forms leave the fuser area and are refolded in the
stacker area. “Stacker Control Panel” on page 28 and “Forms Length and Width
Controls” on page 30 describe the stacker area controls in detail.
Note: Roll-feed forms do not use the stacker area. They require a postprocessor.
The pendulum is inside the stacker area, above the stacker table. The swinging of
the pendulum helps the forms to refold correctly.
1 Forms length and width controls
2 Stacker end cover
3 Stacker table
4 Finger belts
5 Stacker gate (open)
6 Stacker control panel
HC6OG045
1
6
2
3
4
5
FORMS WI DTH 18 17 16 15 14 13 12 11 10 9 8
Chapter 3. Functional Areas
27