IBM INFO PRINT 3000 - Manual (Page 63)

Stacker Height Control
The stacker height control is behind the front left cover. This control allows you to
control the height (and weight) of the printed output stack. Raising the stacker
height shortens the height of the output stack. While this reduces the weight of the
output stack, it also required you to empty the stacker more often. For more
information on using this control, see “Adjusting the Stacker Table Height” on
page 117.
Note: Use this control only for fan-fold forms, not for roll-feed forms.
HC6OG077
300
250
COUNTER COUNTER
5
15
10
20
25
Figure 3. Stacker Height Control
Chapter 3. Functional Areas
31