IBM INFO PRINT 3000 User Manual
Page 119
3.
To release the oiler-belt gate, turn the wing nut counterclockwise.
4.
Open the oiler-belt gate.
5.
Allow the oiler belt to cool for at least 10 minutes.
6.
Lower the hot roll shield.
7.
Spread papers on the floor or place a wastebasket under the oiler belt.
8.
Use a piece of lightweight cardboard to scrape paper dust and paper chads
from the oiler belt.
9.
Raise the hot roll shield.
10.
Close the oiler-belt gate.
11.
Turn the wing nut clockwise to latch the gate. Ensure that the gate is firmly
latched.
12.
Close the stacker end cover.
13.
The fuser begins a warm-up cycle. To make the printer ready, SELECT the
Ready
pushbutton on the Display Touch Screen window.
Printing resumes when the fuser completes its warm-up cycle.
HC6OG051
FORMS
WIDTH
18
17
16
15
14
13
12
11
10
9
8
FO
RM
S
W
ID
TH
18
17
16
15
14
13
12
11
10
9
8
Chapter 6. Operator Responsibilities
87