Intel SDS2 User Manual
Page 8
Table of Contents
Intel® Server Board SDS2
Revision 1.2
Order Number: A85874-002
viii
5.
Intel® & ICP Vortex* RAID Controllers will cause the Intel® Server Board SDS2 to halt
during POST when the BIOS Logo screen is enabled.............................................................109
6.
Intel® Server Board SDS2 CD-ROM issues..................................................................110
7.
NIC driver set 5.12 v.2.3.15 for UnixWare* 7.1.1 drops DPC LAN connection..............111
8.
NIC driver set 5.12 v.5.41.27 for Microsoft* Windows* 2000 prevents a DPC LAN
connection when the operating system is loaded ....................................................................111
9.
Extended RAM Step disable option in BIOS Setup has no effect ..................................112
10.
High resolution video modes do not work correctly........................................................112
11.
Lower performance with CAS Latency 2 memory.........................................................113
12.
SDS2 reboots during POST with 4GB or more of total system memory installed........113
13.
Novell NetWare* v. 6.0 does not install on SDS2...........................................................114
14.
Adaptec* 2100S RAID controller causes system lockup and video blanking ................114
15.
SDS2 Build Your Own (BYO) Platform Confidence Test (PCT) v. 1.00 fails on the first
run
115
16.
SDS2 0B71: System Temperature out of the range POST message...........................115
17.
SDS2 0B75: System Voltage out of the range POST message....................................116
18.
Miscellaneous numeric keys entered during POST enable PXE boot...........................116
19.
SDS2 board level operating temperature and power supply voltage tolerance
modification...............................................................................................................................117
20.
Recommendation for SDS2 rubber bumper installation ................................................117
21.
Keyboard and Mouse do not function under Microsoft* Windows* 2000 when legacy
USB is enabled in BIOS setup..................................................................................................119
22.
Data miscompares when using Seagate* ATA III model ST310215A hard drives ........120
23.
Boot to service partition via modem fails........................................................................120
24.
Secondary IDE References Added To Documentation for FAB 5 .................................120
25.
Potential Mylex AcceleRAID 352 Adaptor Card Mechanical Interference at PCI Slot 6. 120
26.
Bootable CD will not boot if inserted during OPTION ROM scan ..................................121
27.
Swapping bootable for non-bootable CDROM during POST causes hang at boot.......121
28.
OB P100 NICs do not show at POST but attempt PXE boot and appear in Boot Menu122
29.
Dodson: Adaptec 39160 in slots 5 & 6 causes Expansion ROM error..........................122
30.
Can Not Change BIOS SETUP IDE Options Using <Enter> Key..................................123
31.
Minimum Wait Time Between Power Off and Power On via Front Panel Power Button Is
One Second..............................................................................................................................123
32.
Unable to boot Netware 6.0 (NW6) From CD ROM With Adaptec Adaptor 2100S in Slot
6.
123
33.
3COM* 3C980C-TX NIC causes Microsoft* Windows* 2000 blue screen when greater
than 4GB of system memory is installed..................................................................................124