Maintenance – Invacare 9000 STANDARD WEIGHT User Manual

Page 31

Advertising
background image

4 SAFETY INSPECTION/TROUBLESHOOTING

Part No 1100868

31

Invacare® Jymni™ Wheelchair

4.3

Maintenance

Maintenance Safety Precautions

Suggested Maintenance Procedures

1.

Before using your Jymni Series wheelchair, make sure all nuts and bolts are tight.

2.

Check all parts for damage or wear and replace.

3.

Check all parts for proper adjustment.

4.

Standard and Light Weight Models ONLY - Keep quick-release axles free of dirt and lint to ensure positive locking and proper operation. Refer

to Adjusting the Quick-Release Axle on page 50.

5.

Oil quick-release axles at least once a month (3-in-1 oil

®

or equivalent).

6.

The rear wheels, casters and tires should be checked periodically for cracks and wear, and should be replaced by a qualified technician if damaged

ƽ

WARNING

After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or

damage may result.
DO NOT overtighten hardware attaching to the frame. This could cause damage to the frame tubing

.

ƽ

WARNING

DO NOT use the wheelchair unless it has the proper tire pressure (p.s.i.).

DO NOT overinflate the tires. Failure to follow these suggestions may cause the tire to explode and cause bodily harm.
The recommended tire pressure is listed on the sidewall of the tire.

CAUTION

As with any vehicle, check the wheels and tires periodically for cracks and wear. Replace if damaged. Refer to Replacing/Repairing Rear

Wheel Tire/Tube on page 32 and Replacing/Repairing Caster Tire/Tube on page 33.

Advertising