Replacing headrest/back upholstery – Invacare 9000 STANDARD WEIGHT User Manual
Page 62
11 RECLINER
Invacare® Jymni™ Pediatric Series Wheelchair
62
11.4 Replacing Headrest/Back Upholstery
Headrest Upholstery
1.
Remove the headrest pillow. Refer to Replacing Headrest Pillow on
2.
Remove the six mounting screws that secure the headrest
upholstery to the headrest extension tubes.
3.
Secure new headrest upholstery onto headrest extension tubes
with the existing six mounting screws.
4.
Install headrest pillow. Refer to Replacing Headrest Pillow on
Back Upholstery
1.
Unthread one knob on either side of the spreader bar and loosen
the opposite knob.
2.
Remove the eight mounting screws that secure the back upholstery
to the back canes.
3.
Secure the new back upholstery to the back canes with the existing
eight mounting screws. Securely tighten.
4.
Secure the knob of spreader bar to side frame. Securely tighten
both knobs.
FIGURE 4 Replacing Headrest/Back Upholstery
Headrest
Upholstery
Headrest
Extension
Tube
Knob
Back
Cane
Mounting
Screws
Back
Upholstery
Mounting
Screws