Warning – Invacare 9000 STANDARD WEIGHT User Manual
Page 67
12 OPTIONS
67
Invacare® Jymni™ Pediatric Series Wheelchair
12.3 Installing the 1-inch Forward Rear Wheel Positioner
1.
Remove both rear wheels from the wheelchair. Refer to
Removing/Installing Rear Wheels on page 48.
2.
Position the right hand 1-inch forward rear wheel positioner onto the
right hand side of the wheelchair frame (FIGURE 2).
3.
Secure the 1-inch forward rear wheel positioner to the wheelchair frame
using the two mounting screws, spacers and locknuts.
4.
Repeat STEPS 2-3 to Install the left hand 1-inch forward wheel positioner.
5.
Reinstall the rear wheels onto the 1-inch forward brackets. Refer to
Removing/Installing Rear Wheels on page 48.
6.
If necessary, install the anti-tippers. Refer to Installing/Adjusting
FIGURE 2 Installing the 1-inch Forward Rear Wheel Positioner
ƽ
WARNING
DO NOT use the 1-inch forward bracket on recliner wheelchairs OR adjustable angle back wheelchair. Otherwise injury or damage may
occur.
Recliners and Wheelchairs with 1-Inch Forward Rear Wheel Positioner Only: Anti-tippers MUST BE attached at all times.
Right and left hand sides of the wheelchair are
determined from the users position.
Spacer
Mounting Screw
Spacer
1-Inch Forward Rear
Wheel Positioner
Mounting Screw
Locknuts