Heel loop replacement – Invacare 9000 STANDARD WEIGHT User Manual

Page 36

Advertising
background image

5 FRONT RIGGINGS

Invacare® Jymni™ Pediatric Series Wheelchair

36

Part No 1100868

5.3

Heel Loop Replacement

Swingaway Footrests/Elevating Legrest (J932A, J932A-14, J933A and J934A)

1.

Remove the four mounting screws and washers that secure the heel loop to the BOTTOM of the footrest.

2.

Remove the heel loop from the footrest.

3.

Position the new heel loop as shown in FIGURE 3 and reverse STEPS 1-2 to reassemble.

Elevating Legrest (J934A-14 ONLY)

1.

Loosen, but do not remove the bolt and locknut that secure the lower half of the footrest to the swingaway footrest assembly.

2.

Remove the lower footrest assembly.

3.

Remove the mounting screw and locknut that secure the heel loop to the footrest.

4.

Slide heel loop over cane of the footrest assembly.

5.

Replace heel loop.

6.

Reverse STEPS 1-4 to reassemble.

FIGURE 3 Adjusting the Elevating Legrest Assembly

When securing the heel loop to the footrest assembly, tighten the mounting screw and locknut until the spacer is secure.

JA932A,

JA932A-14,

J933A, J934A

Mounting Screw

Spacer

Locknut

Bolt and Locknut

Heel Loop

Cane

Lower Footrest

Assembly

Footrest

Heel Loop

Mounting Screw

Washer

J934A-14

Advertising