Replacing back upholstery – Invacare 9000 STANDARD WEIGHT User Manual
Page 45
7 SEAT AND BACK
45
Invacare® Jymni™ Pediatric Series Wheelchair
7.2
Replacing Back Upholstery
1.
Remove the two mounting screws and washers that secure the existing back upholstery to the back canes (Detail “A”).
2.
Remove the two mounting screws and locknuts that secure one back cane to the wheelchair frame (Detail “B”).
3.
Pull the loose back cane out of the existing back upholstery.
4.
Pull the existing back upholstery up and over the mounted back cane.
5.
Install the new back upholstery over the mounted back cane.
6.
Slide the loose back cane through the new back upholstery.
7.
Secure the back cane to the wheelchair frame with the two mounting screws, spacers and locknuts.
8.
Secure the new back upholstery to the back canes with the existing mounting screws and washers.
FIGURE 2 Replacing Back Upholstery
It is necessary to remove only one back cane to replace the back upholstery.
Back Upholstery
Washer
Mounting
Screws
Back Cane
Detail “A”
Detail “B”
Back Cane
Mounting Screws
Locknuts
Wheelchair Frame