Icom IC-208H - Manual (Page 33)

■ One-touch PTT function
The PTT switch can be operated as a one-touch PTT switch
(each push toggles between transmit/receive). Using this
function you can transmit without pushing and holding the
PTT switch.
To prevent accidental, continuous transmission with this func-
tion, the transceiver has a time-out timer. See p. 62 for de-
tails.
z Push [FUNC] then [
PRIO 3(PTT-M)] to turn the
one-touch PTT function ON.
• The activity indicator lights green.
x Push [PTT] to transmit and push again to re-
ceive.
• A beep sounds when transmission is started and a
long beep sounds when returning to receive.
• “$” blinks when transmitting with the one-touch
PTT function.
c Push [FUNC] then [
PRIO 3(PTT-M)] to turn the
one-touch PTT function OFF.
• The activity indicator goes out.
■ Audio mute function
This function temporarily mutes the audio without disturbing
the volume setting.
➥ Push [FUNC] then [
SQL Y D(MUTE)] to mute
audio signals.
• The audio mute indicator, “ ” appears.
• Push [ CLR A(MW)] (or any other key) to cancel the
function.
Appears
MUTE
indicator blnks
PTT-M
18
3
BASIC OPERATION
3