Icom IC-208H - Manual (Page 47)

32
5
MEMORY OPERATION
5
Channel names can also be programmed via the mi-
crophone.
z Push [FUNC] then [
CLR A(MW)] momentarily.
• “!” and memory channel number blink.
x Push [Y]/[Z] to select the memory/call channel to be as-
signed memory names.
c Push [BAND].
• Frequency readouts disappear and a cursor blinks.
v Push [Y]/[Z] to select the desired character.
• The selected character blinks.
b Push [
SET
B(D-OFF)] or [
ENT
C(T-OFF)] to move the cur-
sor to left or right, respectively.
n Repeat steps v and b until the desired channel names
are displayed.
m Push [FUNC] then [
CLR
A(MW)] for 1 sec. to program the
name and exit the channel name programming condition.
[EXAMPLE]: Programming “CLUB” into memory channel 1.
Push
Repeat the
previous
steps. Beep
Beep
Beep
“
“
“
“
“
Push to select the channel. Push to select the character
Push or to move the cursor.
Push , then push .
Push , then push for 1 sec.