Icom IC-208H - Manual (Page 73)

58
11
OTHER FUNCTIONS
11
D D DTCS code
Sets DTCS code (both encoder and decoder) for DTCS
squelch operation. Total of 104 codes are available.
(default: 023)
D D DTCS polarity
Sets DTCS polarities for transmission and reception from
“NN,” “NR,” “RN” and “RR.”
(default: NN)
D D Offset frequency
Sets the duplex offset frequency within 0 to 20 MHz range.
During duplex (repeater) operation, transmit frequency (or re-
ceive when reverse function is set to ON) shifts the set fre-
quency.
(default value may differ depending on operating frequency
band and versions)
D D Tuning step
Selects tuning step from 5, 10, 12.5, 15, 20, 25, 30, 50, 100
and 200 kHz for [DIAL] or [Y]/[Z] operation.
(default value may
differ depending on operating frequency band and versions)
• Transmit : normal
Receive : normal
(default)
• Transmit : normal
Receive : reverse