Iluv i277 User Manual
Page 22
Stereo Audio System for Your iPod
V11M11_IM_EN_12082006
www.i-Luv.com
- 21 -
OPERATIONAL INSTRUCTIONS
4.
Now, you are ready to pair with other devices with Bluetooth technology.
5.
Before pairing make sure to set the BluePin
TM
as TX or RX depending on the purpose.
NOTE: TX is for transmitting signal to other devices like stereo headset with Bluetooth technology with A2DP Profile. RX is for receiving signal
from other sources like a cell phone with Bluetooth stereo profile (A2DP) or Media Players equipped with Bluetooth Stereo Profile (A2DP).
6.
The switch for TX and RX is located on the left side of the BluePin
TM
unit.
Example (RX Mode): If you have a MP3 cell phone with Bluetooth Stereo Profile (A2DP) could transmit the music on your cell phone to our i277
w/ Bluepin
TM
to enjoy the music on the i277(For this operation the BluePin
TM
should be set to RX for receiving).
TX/RX Switch