Iluv i277 User Manual
Stereo Audio System for Your iPod
- 23 -
Bluetooth Stereo Headset with Bluetooth Stereo Profile (A2DP)(TX Mode):
’s switch to TX for transmitting to the Headset.
in the i277’s BluePin
port, and once BluePin
lights up, push the PAIRING button for 3 seconds until you get
red and blue flashing light.
Push pairing button on the headset with Bluetooth technology until red and blue flashing light comes up.
When both units are no longer flashing red and blue lights, and flashes steady blue light you are now connected and can send music
from i277 to Headset with Bluetooth wireless technology. The speakers of i277 will be muted after it connected to Bluetooth headset,
you can press the MUTE button or VOLUME buttons to release mute. After turn off the Bluetooth headset, or Bluetooth headset is out of
transmitting range, the speakers mute will be released.
After paired with Bluetooth headset, the pairing information will be stored in both devices even if one or both of them have been turned
off. Next time you turn on both devices, you don’t need pair them again, just follow one of following methods to connect them.
After turn on the Bluetooth headset, it will connect i277 automatically. If Bluetooth headset doesn’t have automatic
connection function, just press PLAY/PAUSE button to connect i277.
Or press PAIRING button of BluePin
to connect Bluetooth headset.
If Bluetooth headset is in standby mode, press the PLAY/PAUSE button of Bluetooth headset to connect i277.
You can remote control i277 by using function buttons of Bluetooth headset, details as follows:
Am/Fm band select
Function select (iPod, Radio, Aux)
Auto searching-Forward Disable
Noted: Depends on the Bluetooth headset, these functions might be disabled due to software issues.