Appendix d – rs-485 communication, Appendix e – labeling – IQ SMARTSENSOR 105 User Manual
Page 29
SmartSensor 105 User Guide – Wavetronix LLC
9/20/07
- -
29
Appendix D – RS-485 Communication
RS-485 communication between the SmartSensor and PC may be established by using
the SeaLink +485 model #2102 RS-485 to USB converter by SeaLevel, along with the
standard 25-pin “D” female connector with the following pin out:
1: No Connection (N/C)
10: N/C
18: N/C
2: -485
11: N/C
19: N/C
3: -485
12: N/C
20: N/C
4: N/C
13: N/C
21: N/C
5: N/C
14: +485
22: N/C
6: N/C
15: N/C
23: N/C
7: GND
16: +485
24: N/C
8: N/C
17: N/C
25: N/C
9: N/C
Appendix E – Labeling
The following label, visible to all persons exposed to the transmitter, is provided on the
product unless SAR compliance can be demonstrated:
Warning: All persons must beat least 20 cm from antenna when
transmitter is operating to meet FCC RF exposure requirements.