Attaching the gasket to the i/o shield, Attaching the label to the i/o shield, Figure 3. attaching the gasket to the i/o shield – Intel SHG2 User Manual
Page 24: Figure 4. attaching the label to the i/o shield, Intel server board shg2 product guide
Advertising
24
Intel Server Board SHG2 Product Guide
Attaching the Gasket to the I/O Shield
1. Remove the two backing strips from the gasket.
2. Press the gasket onto the inside face of the I/O shield as shown.
OM14359
Figure 3. Attaching the Gasket to the I/O Shield
Attaching the Label to the I/O Shield
1. Remove the backing from the label included with your server board.
2. Press the label onto the outside face of the I/O shield.
OM14360
PARALLEL
KYBD
MOUSE
(10/1
00)
NIC1
(Gbit)
NIC2
1
2
3
USB
Figure 4. Attaching the Label to the I/O Shield
Advertising