Intel SHG2 - Manual (Page 36)

36 Intel Server Board SHG2 Product Guide
Intel ® SC5200 Base Server Chassis Note
Connect front system fans to the System Fan 3 and System Fan 5 connectors on the server board.
Intel SC5200 Hot-Swap, Redundant Power Server Chassis Note
Be sure to attach system fans to their correspondingly numbered connector on the server board.
System fan numbers can be found on the system fan carrier and on the system fan cables.
Cable Routing – Intel SC5200 Base Chassis
To ensure proper air-flow within the chassis, follow the cable routing guidelines below.
IDE or SCSI Cables
Cables that connect to devices in the lower device bays should be routed around the epac system
fan carrier as shown below.
1. Route cables as shown.
2. Replace the top half of the epac.
OM14556
Figure 21. Routing Cables