Pci installation tips, Problems with application software, Bootable cd-rom is not detected – Intel SHG2 User Manual

Page 86

Advertising
background image

86

Intel Server Board SHG2 Product Guide

PCI Installation Tips

Some common PCI tips are listed here.

q Certain drivers may require interrupts that are not shared with other PCI drivers. The SSU can

be used to adjust the interrupt numbers for PCI devices. For certain drivers, it may be
necessary to alter settings so that interrupts are not shared.

Problems with Application Software

If you have problems with application software, do the following:

q Verify that the software is properly configured for the system. See the software installation and

operation documentation for instructions on setting up and using the software.

q Try a different copy of the software to see if the problem is with the copy you are using.
q Make sure all cables are installed correctly.
q Verify that the server board jumpers are set correctly. See Chapter 5.
q If other software runs correctly on the system, contact your vendor about the failing software.

If the problem persists, contact the software vendor’s customer service representative for help.

Bootable CD-ROM Is Not Detected

Check the following:

q Is the BIOS set to allow the CD-ROM to be the first bootable device?

Advertising