Intel Itanium 2 Processor - Manual (Page 79)

Datasheet 79
6
System Management Feature
Specifications
The Itanium 2 processor includes a system management bus (SMBus) interface. This chapter
describes the features of the SMBus and SMBus components.
6.1 System Management Bus
6.1.1 System Management Bus Interface
The Itanium 2 processor includes an Itanium processor family SMBus interface which allows
access to several processor features. The system management components on the processor include
two memory components (EEPROMs) and a thermal sensing device (digital thermometer). The
processor information EEPROM (PIROM) is programmed by Intel with manufacturing and feature
information specific to the Itanium 2 processor. This information is permanently write-protected.
Section 6.2 provides detail on the PIROM. The other EEPROM is a scratch EEPROM that is
available for other data at the system vendor’s discretion. The thermal sensor can be used in
conjunction with the information in the PIROM and/or the Scratch EEPROM for system thermal
monitoring and management. The thermal sensing device on the processor provides an accurate
means of acquiring an indicator of the junction temperature of the processor core die. The thermal
sensing device is connected to the anode and cathode of the Itanium 2 processor on-die thermal
diode. SMBus implementation on the Itanium 2 processor uses the clock and data signals as
defined by SMBus specifications.
6.1.2 System Management Interface Signals
Table 6-1 lists the system management interface signals and their descriptions. These signals are
used by the system to access the system management components via the SMBus.
Figure 6-1 shows the logical schematics of SMBus circuitry on the Itanium 2 processor and shows
how the various system management components are connected to the SMBus. The reference to
the System Board at the lower left corner of
Figure 6-1 shows how SMBus address configuration
for multiple Itanium 2 processors can be realized with resistor stuffing options.
Table 6-1. System Management Interface Signal Descriptions
Signal Name Pin Count Description
3.3V 1 Voltage supply for EEPROMs and thermal sensor.
SMA[2:0] 3 Address select passed through from socket.
SMSC 1 System management bus clock.
SMSD 1 System management serial address/data bus.
SMWP 1 Scratch EEPROM write protect.
THRMALERT# 1 Temperature alert from the thermal sensor.