Intel Vig390s - Manual (Page 100)

Vig390s Motherboard Manual V1.0 99
Boot / Security Settings Sub-menu
This menu configures the system supervisor and user passwords
Figure 54: Boot / Security Settings Sub-menu
A detailed description of each of the features is given in the following table.
Table 55: Boot / Security Settings Sub-menu
Feature Options Description
Supervisor
Password Not Installed
[Default] Not installed is displayed when a “Supervisor
Password” has not been set.
User Password Not installed
[Default]
Not installed is displayed when a “User Password”
has not been set.
Change
Supervisor
Password None Press <Enter> to set Supervisor password.
The password will need to be set twice with a
conformation windows and <Enter> to confirm.
User Access
Level • Full Access
[Default]
• No Access
• View only
• Limited
Will not be displayed unless a “Supervisor Password”
has been set.
Change User
Password
None Will not be displayed unless a “Supervisor Password”
has been set.
Press <Enter> to set user password.
The password will need to be set twice with a
conformation windows and <Enter> to confirm.
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
User Access Level [Full Access]
Change User Password
Clear User Password
Password Check [Setup]
<Enter> to change
Password.
<Enter again to
disable password.
← Select Screen
↑↓ Select Item
+- Change Field
Tab Select
Field
F1 General Help
F10 Save and Exit
ESC Exit
v02.53 (C) Copyright 1985-2002, American Magatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Power Boot Exit