Intel Vig390s - Manual (Page 70)

Vig390s Motherboard Manual V1.0 69
Main / Primary P-ATA IDE Master or Slave Sub-menu
This menu shows a detected hard drive or CD-ROM features and allows
configuration settings to be made. The example is of a hard drive.
Figure 32: Main / Primary P-ATA IDE Master or Slave Sub-menu
A detailed description of each of the features is given in the following table.
Table 33: Main/Primary P-ATA IDE Master or Slave Sub-menu
Feature Options Description
Device none Displays detected device connected
Vendor none Displays the detected vendor name and model of
device
LBA Mode none Displays the detected translation mode or set by user
Block Mode none Displays the detected Block mode or set by user
PIO Mode none Displays the detected PIO mode or set by user
Async DMA none Displays the detected asynchronous DMA mode or
set by user
Ultra DMA none Displays the detected Ultra DMA mode or set by user
SMART
Monitoring none Displays SMART monitoring support
Type • Not Installed
• Auto [Default]
• CDROM
• ARMD
Specifies the IDE configuration mode for IDE devices
User allows capabilities to be changed
Auto fills-in capabilities from ATA/ATAPI devices
Primary P-ATA IDE Master
Device : Hard Drive
Vendor : HDS722512VLAT20
Size : 123.5GB
LBA Mode : Supported
Block Mode : 16 Sectors
PIO Mode : 4
Async DMA : Multi DMA Word-2
Ultra DMA : Ultra MDA-5
SMART Monitoring: Supported
Type
[Auto]
LBA/Large Mode [Auto]
Block [Multi-sector Transfer] [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
SMART Monitoring [Auto]
32Bit Data Transfer [Disabled]
Select the type
of device connected
to the system.
← Select Screen
↑↓ Select Item
+- Change Field
F1
General Help
F10 Save and Exit
ESC Exit
v02.53 (C) Copyright 1985-2002, American Magatrends, Inc.
BIOS SETUP UTILITY
Main